Every home cinema owner knows the problem: the bigger the subwoofers, the more the room starts to boom. Swiss specialist PSI Audio now has an answer for rooms that play loud. The PSI Audio AVAA C225 is an active bass trap designed for high-performance home cinemas and high-SPL listening rooms. It works from 12Hz to 130Hz and handles sound pressure levels up to 135dB, well beyond what the existing AVAA C214 was built for.
How an active bass trap works
Passive bass traps need a lot of volume to do anything useful at low frequencies. AVAA, short for Active Velocity Acoustic Absorber, takes a different route. A pressure sensor monitors the low-frequency acoustic pressure around the unit, and an active control system converts that information into a movement of a membrane. The result behaves like an acoustic opening: excess bass energy is absorbed instead of reflected back into the room. According to PSI Audio, the AVAA C225 continuously absorbs excess low-frequency energy across its entire range and needs no calibration. It also does not have to be tuned to specific room modes.

C225 versus C214
The AVAA C214 remains PSI Audio’s choice for critical listening, with a range of 15Hz to 160Hz and a maximum of 115dB SPL. The PSI Audio AVAA C225 shifts the focus to cinema-level output. It goes deeper, down to 12Hz, and works up to 130Hz, which covers the range where room modes cause the most trouble in a typical home cinema. The big difference is headroom: 135dB SPL, made possible by a 300W amplifier. That makes the C225 suitable for rooms with multiple subwoofers and infrasonic extension, where a C214 would run out of steam. The older AVAA C20 is now end of life.

What it does in the room
The effect of an active bass trap shows up mostly in the time domain. Bass notes stop when they should, instead of hanging in the room. PSI Audio shows this with SPL decay measurements: with AVAA in place, low-frequency energy dies away much faster. For film, that means tighter explosions and more articulate bass lines in soundtracks. For music, it means clearer bass and less masking of the midrange. It also complements other low-frequency solutions, such as in-wall subwoofers like the NextLevel Acoustics Frame Sub.

Design and placement
The PSI Audio AVAA C225 is a substantial unit: 78cm high, 57cm wide and 57cm deep, with a weight of 33kg and a black finish. Like the C214, it is designed to stand on the floor, typically in a corner or along a wall, where pressure-based absorption is most effective. In larger rooms, several units can work together.
Pricing and availability
PSI Audio has not published a price for the AVAA C225. It is available through PSI Audio dealers; more details are on the PSI Audio website.
Key specifications
- Type: active bass trap (Active Velocity Acoustic Absorber)
- Frequency range: 12Hz–130Hz
- Maximum operating SPL: 135dB
- Amplifier: 300W
- Calibration: none required
- Dimensions: 78 x 57 x 57cm (H x W x D)
- Weight: 33kg
- Finish: black



































