ELAC has revealed the ELAC Debut Reference DBR63, the bookshelf speaker that launches the third generation of its Debut Reference line, officially called Debut Reference 3.0. The German brand keeps the 6.5-inch two-way format of the DBR62, but replaces almost everything that matters: the tweeter, the woofer, the crossover and the cabinet. In the US, the speaker costs $899 per pair, with shipping starting on 26 December. In Japan, it arrives in December.
An aluminium tweeter replaces the soft dome
The biggest change is at the top. The ELAC Debut Reference DBR63 drops the soft dome tweeter of its predecessor for a 1-inch aluminium dome with an integrated phase plug. It sits in a waveguide with a new geometry, which ELAC says improves dispersion. A stiffer metal dome usually pushes its breakup mode far above the audible band, so the move should bring more detail in the highest octaves.

Below it, ELAC fits a redesigned 6.5-inch aramid fibre woofer. It uses a single-piece cone without a traditional dust cap, which should improve rigidity and keep resonances under control. The crossover point sits at 2.5kHz, and the crossover network itself has been revised for the new drivers.
A cabinet that looks more expensive
The ELAC Debut Reference DBR63 also gets a clear upgrade in looks. The rigid MDF cabinet has rounded edges, interlocking joints and a full perimeter brace for extra stiffness. A stitched synthetic leather panel covers the top, and the grille attaches magnetically, so there are no mounting holes in the front baffle. The front-firing dual-flared port of the DBR62 stays.

ELAC lists five finishes on its website: white, black, titanium, walnut and green. Availability of each finish may differ per region. In the US, black, white, green and walnut are listed first.
Easy to drive, but not tiny
With a sensitivity of 86.5dB and a nominal impedance of 6 ohms, the ELAC Debut Reference DBR63 is no difficult load. ELAC recommends amplifiers between 20 and 140 watts. The frequency response runs from 49Hz to 34kHz at -3dB. At 359mm high, 222mm wide and 275mm deep, and weighing 8.2kg each, this is a full-size bookshelf speaker that will feel most at home on a good pair of stands.

The Debut line has been a reliable entry into real hi-fi for years. We already covered the smaller sibling in our article on the ELAC Debut 2.0 B6.2. The Debut Reference 3.0 series is not limited to this bookshelf model: ELAC also shows the DFR53 floorstander and the DCR53 centre speaker on its website. That makes it possible to build a complete, timbre-matched home cinema system around the new drivers. At $899 per pair, the ELAC Debut Reference DBR63 moves clearly above the regular Debut 3.0 models, and the materials and finish should justify that step.
Pricing and availability
The ELAC Debut Reference DBR63 costs $899 per pair in the US, where it is open for pre-order, with deliveries from 26 December 2026. In Japan, it costs ¥198,000 in black and ¥231,000 in walnut, with a December release. European pricing has not been announced yet. More information is on the ELAC website.
Key specifications
- Type: 2-way bass reflex bookshelf speaker, front-firing port
- Tweeter: 1-inch aluminium dome with phase plug and waveguide
- Woofer: 6.5-inch aramid fibre, single-piece cone
- Crossover: 2,500Hz
- Frequency response: 49Hz – 34kHz (-3dB)
- Sensitivity: 86.5dB (2.83V/1m)
- Impedance: 6 ohms
- Recommended amplifier power: 20 – 140W
- Dimensions and weight: 359 x 222 x 275mm, 8.2kg
- Finishes: white, black, titanium, walnut, green
- Price: $899 per pair (US)

































