Chord Electronics has launched the ULTIMA 7, the most affordable full-width stereo power amplifier in its ULTIMA range. First shown at HIGH END Vienna 2026, the Chord ULTIMA 7 is also the first Chord amplifier to combine Class G technology with the brand’s Dual Feed Forward error correction. It costs £6,500 and is available now.
Chord ULTIMA 7: Class G meets Dual Feed Forward
In a Class G amplifier, the output stage switches between several supply rails depending on the signal. At normal listening levels, the amplifier runs on a lower voltage, which keeps heat and power consumption down. When the music demands it, the higher rails take over. Chord says the Chord ULTIMA 7 uses multiple power supplies instead of one, which allows a more compact chassis and cooler running.
The weak point of Class G is usually the moment the amplifier switches between rails, where distortion can appear. Here, Chord relies on the Dual Feed Forward error correction from the rest of the ULTIMA range to keep that transition clean. Proprietary vertical MOSFETs, fully balanced circuitry and Chord’s high-frequency switch-mode power supply complete the design, and the amplifier is convection cooled.

140 watts, with bursts above 1,000 watts
Chord specifies 140 W RMS per channel into 8 ohms and 250 W into 4 ohms. For demanding loads, the Chord ULTIMA 7 can deliver short bursts of more than 1,000 W. Chord gives a THD figure of 0.015%, a signal-to-noise ratio of -105 dB and channel separation of 98 dB, with a frequency response of 5 Hz to 25 kHz.
Founder and owner John Franks is confident about what that means in practice: “It possesses the transient speed and stability to handle complex, highly reactive loads without ever breaking a sweat.”

Built to match the ULTIMA PRE 3
The Chord ULTIMA 7 has the same height and look as the ULTIMA PRE 3 preamplifier, its natural partner. On the rear are one pair of balanced XLR inputs, one pair of RCA inputs, two 12 V triggers and one pair of high-current speaker terminals. The solid, CNC-milled aluminium chassis measures 132 × 480 × 382 mm (H × W × D) including the Integra legs, weighs 14.45 kg and has Chord’s familiar LED light ring.
The ULTIMA 7 is handmade in Kent, England, and comes with a five-year warranty. Chord also recommends it alongside its DAVE DAC, Hugo M Scaler and Hugo TT 2. If you want to know more about Chord’s compact digital range, read our article on the Chord Qutest family.

Pricing and availability
The Chord ULTIMA 7 costs £6,500 and is available now in Jett Black or Argent Silver, with matching Integra legs. That makes it about £3,500 cheaper than the ULTIMA 5. Euro and US prices have not yet been announced, so check with your local Chord Electronics dealer. More information is available on the Chord Electronics website.
Key specifications
- Type: stereo power amplifier, Class G with Dual Feed Forward error correction
- Output: 140 W RMS per channel (8 ohms), 250 W (4 ohms), bursts above 1,000 W
- THD: 0.015%
- Signal-to-noise: -105 dB; channel separation: 98 dB
- Frequency response: 5 Hz – 25 kHz
- Gain: 30 dBV; input sensitivity 3 V RMS; input impedance 47 kΩ
- Inputs: 1 × balanced XLR pair, 1 × RCA pair, 2 × 12 V trigger
- Power consumption: 20 W idle, 10 W standby, 640 W maximum
- Dimensions (H × W × D): 132 × 480 × 382 mm (with Integra legs)
- Weight: 14.45 kg
- Finishes: Jett Black, Argent Silver
- Warranty: five years
- Price: £6,500


































