Greek loudspeaker specialist AKU Audio presents the AKU Audio Enarghia as its flagship: a complete active loudspeaker system rather than a pair of speakers alone. Each system comes with its own preamplifier, processor, DACs, streamer, 3,500 watts of custom amplification and cabling, and the room tuning is done on site by the company’s founder. AKU calls it “a truly turnkey solution”.
AKU Audio Enarghia: an active three-way design
The AKU Audio Enarghia is an active three-way floorstanding loudspeaker with five internal chambers. The bass section combines two 12-inch aluminium high-excursion woofers with four 12-inch aluminium passive radiators, tuned between 15 and 28 Hz. Two 4.7-inch paper-cone midrange drivers with neodymium magnets and under-hung motors cover the midrange, and a 1.34-inch beryllium dome tweeter handles the treble.
AKU quotes an in-room frequency response of 12 Hz to 40 kHz (0/-3 dB) and 25 Hz to 22 kHz within ±0.5 dB. Maximum SPL is given as 120 dB.

DEQX processing and Hypex Ncore power
In the AKU Audio Enarghia, the crossovers are not built from passive components but run in a DEQX DSP processor, one per pair. They are linear phase, with slopes of up to 200 dB per octave, and the same processor provides room EQ. Each driver group gets its own amplifier channel: an eight-channel Hypex Ncore amplifier delivers 3,500 watts in total, with 1,000 W for the bass, 500 W for the midrange and 250 W for the tweeter. AKU specifies THD+N of 0.006% at half power, a signal-to-noise ratio of 118 dB and an efficiency of 92%.
Because the amplifiers drive the drivers directly, without a passive crossover in between, the system can control each driver precisely. If you want to know more about why separate amplification per driver matters, read our explainer on bi-amping and tri-amping.

A 130 kg cabinet with sheep’s wool damping
The cabinet is built from 38 mm stacked MDF with internal bracing, a rubber-aluminium damping lining and sheep’s wool as absorption material. The internal chambers are asymmetric, and a diffuser is integrated around the midrange. Each AKU Audio Enarghia stands 1,825 mm tall, 400 mm wide and 610 mm deep, and weighs 130 kg. Four 360° aluminium-rubber wheels make it possible to move the speakers into position.
The amplifier and processor come in their own housings, with CNC-cut stainless steel front and back plates on the amplifier, and an eight-pole Neutrik Speakon connector links each speaker to the amplifier. The AKU Audio Enarghia comes in four finishes, Ivory Black, Titanium White, Merlot Red and Magic Blue, and every speaker carries a laser-etched stainless steel plaque on the back.

Pricing and availability
AKU Audio does not publish a price for the AKU Audio Enarghia. The system is configured to order, and interested buyers can request a quote through the configurator on the AKU Audio website. The company has its showroom in Kifissia, Athens, and offers bespoke room tuning and after-sales support.
Key specifications
- Type: active three-way, five-chamber floorstanding loudspeaker system
- Bass: 2 × 12″ aluminium woofers, 4 × 12″ aluminium passive radiators (tuned 15 – 28 Hz)
- Midrange: 2 × 4.7″ paper cone, neodymium, under-hung motor
- Tweeter: 1.34″ beryllium dome
- Crossover: linear phase, up to 200 dB/oct, DEQX DSP with room EQ
- Frequency response: 12 Hz – 40 kHz in room (0/-3 dB); 25 Hz – 22 kHz (±0.5 dB)
- Maximum SPL: 120 dB
- Amplification: 8-channel Hypex Ncore, 3,500 W in total
- Dimensions (H × W × D): 1,825 × 400 × 610 mm; 130 kg per speaker
- Finishes: Ivory Black, Titanium White, Merlot Red, Magic Blue
- Price: on request


































