Eversolo has added a dedicated clock to its high-end line-up. The Eversolo C10 is a high-precision master clock built around a custom 10 MHz OCXO, and it is designed to feed an external reference to the brand’s T10 streaming transport and DAC-Z10, as well as to the new DAC-R8 and other gear with a clock input.
Eversolo C10: a custom SC-cut OCXO at its core
The heart of the Eversolo C10 is an oven-controlled crystal oscillator (OCXO) with an SC-cut crystal. An OCXO keeps the crystal at a constant temperature inside a small oven, so its frequency barely drifts as the room warms up or cools down. SC-cut crystals are the more expensive choice, but they are less sensitive to temperature and mechanical stress than the common AT-cut type.
Eversolo specifies phase noise of -115 dBc/Hz at a 1 Hz offset and a noise floor of -170 dBc/Hz or lower. A high-precision PLL derives the other frequencies from the oscillator. According to Eversolo, the C10 reaches its operating temperature within five minutes at 25°C.

Four buffered outputs for a whole digital chain
On the rear, the Eversolo C10 has four BNC clock outputs, each with its own buffer circuit, so that connecting several devices does not load the oscillator or let one device disturb another. The outputs support 10 MHz, 25 MHz and 100 MHz, as well as frequencies in the 44.1 kHz and 48 kHz families. That makes the C10 usable as a 10 MHz reference for a streamer and DAC, or as a word clock source for other equipment.
The Eversolo C10’s power supply uses a toroidal transformer, and Eversolo has arranged the internal sections to keep electrical interference away from the clock circuit. The chassis is aluminium and measures 365 × 300 × 135 mm.

An 8.8-inch touchscreen
Like the other high-end Eversolo components, the Eversolo C10 has a large display on the front: an 8.8-inch IPS touchscreen. It shows the warm-up progress, the oven temperature, the operating status and calibration information, so you can see at a glance when the clock has settled.
Why a master clock?
Every digital audio device has its own internal clock, and timing errors (jitter) can affect how accurately a DAC converts the digital signal. A master clock gives the devices in a system one shared, very stable reference. How audible that is depends on the quality of the internal clocks it replaces, and opinions in the audio world differ. For owners of an Eversolo system, the C10 is the logical last step: the T10 and DAC-Z10 were designed from the start with an external clock input.
If you want to know more about the transport it is designed for, read our Eversolo T10 review.

Pricing and availability
In the U.S., the Eversolo C10 costs $1,880 and is available to pre-order at dealers such as Bloom Audio. In Europe, retailers list it at around €1,990. Prices can differ per country, so check with your local dealer. More information is available on the Eversolo website.
Key specifications
- Type: high-precision master clock
- Oscillator: custom 10 MHz SC-cut OCXO with high-precision PLL
- Phase noise: -115 dBc/Hz at 1 Hz offset; noise floor -170 dBc/Hz or lower
- Outputs: 4 × BNC, individually buffered
- Output frequencies: 10 MHz, 25 MHz, 100 MHz, 44.1 kHz and 48 kHz families
- Warm-up: within five minutes at 25°C
- Display: 8.8-inch IPS touchscreen
- Power supply: toroidal transformer
- Dimensions: 365 × 300 × 135 mm
- Price: $1,880 (U.S.), around €1,990 (Europe)



































