Pro-Ject has added a more powerful model to its Box Design range. The new Pro-Ject Amp Box S3 L is a compact dual-mono stereo power amplifier that delivers 2 × 80 watts into 8 ohms and 2 × 140 watts into 4 ohms, more than three times the output of the existing Amp Box S3. It is the natural partner for the Pre Box S3 preamplifier and costs €499.
Pro-Ject Amp Box S3 L: dual mono in a small box
Where the regular Amp Box S3 is a micro amplifier for small speakers and desktop systems, the Pro-Ject Amp Box S3 L is aimed at larger floorstanders and more demanding loads. Both channels are amplified independently, in a dual-mono layout, and Pro-Ject uses a newly developed amplifier module that it describes as having a “tube like sound”.
Pro-Ject specifies THD+N below 0.005% at 10 W and a signal-to-noise ratio above 97 dB (107 dB A-weighted). Channel separation is better than -82 dB at 10 kHz, and the frequency response is within +0.1 dB at 20 Hz and +0.3 dB at 20 kHz. The gain is 26 dB.

Larger than the Amp Box S3
The extra power needs more space. The Pro-Ject Amp Box S3 L measures 206 × 55 × 153 mm and weighs 1.1 kg without its power supply, against 103 × 36 × 118 mm and 385 g for the Amp Box S3. The sturdy aluminium enclosure protects the electronics against vibration and interference, and power comes from an external 36 V / 5.5 A supply. In standby, the amplifier draws less than 0.5 W.
On the rear are one pair of RCA line inputs and two pairs of isolated speaker terminals that accept 4 mm banana plugs, spades or bare wire. A 12 V trigger input lets the Amp Box S3 L switch on together with a preamplifier or streamer.

A building block for a Box Design system
Pro-Ject’s Box Design concept lets you build a system from separate compact components: a streamer, a DAC, a phono stage, a preamplifier and a power amplifier, each in its own small case. The Pro-Ject Amp Box S3 L fits that idea as the power stage for a Pre Box S3, and the two can be stacked. With 140 watts per channel into 4 ohms, the combination can now drive speakers that would be too much for the smaller amplifier. Pro-Ject is also known for turntables, of course; read our article on the Pro-Ject Signal Orange.

Pricing and availability
The Pro-Ject Amp Box S3 L costs €499 and is available from November 2026 in black or silver. Like the rest of the S3 range, it is designed and produced in Europe. More information is available on the Pro-Ject website.
Key specifications
- Type: dual-mono stereo power amplifier
- Output: 2 × 80 W (8 ohms), 2 × 140 W (4 ohms), 1% THD
- THD+N: <0.005% at 10 W
- Signal-to-noise: >97 dB (107 dB A-weighted)
- Channel separation: better than -82 dB at 10 kHz
- Gain: 26 dB; input sensitivity 1.25 V; input impedance 10 kΩ
- Inputs: 1 × RCA pair, 12 V trigger input
- Outputs: 2 pairs of isolated speaker terminals
- Power supply: external, 36 V / 5.5 A DC; standby <0.5 W
- Dimensions: 206 × 55 × 153 mm (163 mm deep including sockets)
- Weight: 1.1 kg (without power supply)
- Finishes: black, silver
- Price: €499



































