Perlisten is best known for its THX-certified towers and its DPC tweeter array, but not every room has space for floorstanding speakers. With the Perlisten X-Series, the American brand now offers a full architectural line-up: on-wall, in-wall and in-ceiling speakers that bring its waveguide know-how to living rooms and media rooms where the speakers should blend in rather than stand out. The range consists of five models: the X5w, X3w and X2w on-walls, the X3iw in-wall and the X2ic in-ceiling.
X5w: the on-wall flagship
At the top of the Perlisten X-Series sits the X5w, a three-way sealed on-wall speaker. It combines a 38mm silk dome tweeter in a custom waveguide with four 5.5-inch carbon fibre woofers, two of which are high-excursion designs. The waveguide controls dispersion both vertically and horizontally, which matters for a speaker that hangs flat against a wall and often sits next to or around a TV. Perlisten quotes 92dB sensitivity, a 4-ohm impedance and a frequency response of 60Hz to 30kHz. Recommended amplifier power is 50 to 200W. The cabinet measures just 740 x 200 x 100mm and weighs 20kg.

X3w and X2w: smaller on-walls
Below the X5w sit the X3w and the compact X2w. The X2w is a two-way sealed design with the same 38mm waveguided tweeter and one 5.5-inch carbon fibre woofer. It offers 88dB sensitivity, the same 60Hz to 30kHz response and 4-ohm impedance, and measures 330 x 200 x 100mm at 7kg. That makes it an obvious choice for surround or height channels, or for a compact stereo set-up next to a TV. All on-wall models come in Satin Black or Satin White and include a mounting bracket, angle bracket and grille. An X-Series mounting plate is available as an accessory.

X3iw and X2ic: in the wall and ceiling
For fully hidden installations, the Perlisten X-Series includes the X3iw, a two-way in-wall speaker described as the higher-output in-wall option, with a paintable white metal grille. Full specifications for the X3iw are still to be published. The X2ic is a two-way in-ceiling speaker in an infinite baffle design, with a 38mm silk dome tweeter in a waveguide derived from the A-Series and a 6.5-inch carbon fibre woofer. It offers 90dB sensitivity and a 60Hz to 30kHz response. Perlisten says it brings design elements from its S and R-Series in-ceilings down to A-Series pricing, which makes it interesting for Dolby Atmos height channels.

Perlisten for every room
With the X-Series, Perlisten now covers the full spectrum from statement towers, like the Perlisten S4b Black Edition, to architectural speakers for a lifestyle installation. The common thread is controlled dispersion through waveguides and carbon fibre drivers, so the Perlisten X-Series should integrate well with the brand’s other ranges in a mixed home cinema.
Pricing and availability
The Perlisten X-Series is available through Perlisten dealers. In the US, the X5w costs $1,995, the X3w $1,695 and the X2ic $1,195, each. European pricing for the Perlisten X-Series is set by local distributors. More details are on the Perlisten website.
Key specifications
- Models: X5w, X3w, X2w (on-wall), X3iw (in-wall), X2ic (in-ceiling)
- X5w: 3-way sealed, 38mm silk dome + 4x 5.5″ carbon fibre, 92dB, 60Hz–30kHz, 4 ohms, 740 x 200 x 100mm, 20kg
- X2w: 2-way sealed, 38mm silk dome + 5.5″ carbon fibre, 88dB, 60Hz–30kHz, 4 ohms, 330 x 200 x 100mm, 7kg
- X2ic: 2-way infinite baffle, 38mm silk dome + 6.5″ carbon fibre, 90dB, 60Hz–30kHz, 4 ohms
- Recommended power: 50–200W
- Finishes: Satin Black, Satin White (on-wall); paintable white grille (in-wall, in-ceiling)
- US price: X5w $1,995, X3w $1,695, X2ic $1,195 (each)

































