Grado Labs is taking the next step in open-back wireless listening. The new Grado GW200 succeeds the GW100, which Grado describes as the world’s first open-back Bluetooth headphone. The second generation gets a newly developed 44 mm S driver, Bluetooth 5.4 with aptX Lossless and a battery that lasts more than 60 hours. Just as important for Grado fans: you can still plug in a cable and listen without any battery power at all.
Grado GW200: a new 44 mm S driver
The heart of the Grado GW200 is a 44 mm S driver with a paper-composite diaphragm. Grado derived it from the larger S drivers in the Signature HP100 SE and the S950, two of the brand’s most respected wired models. According to Grado, the result is the open, spacious presentation the brand is known for, with clear separation between instruments and a refined low end.
As with all Grado headphones, the design is open-back. Sound escapes freely through the grilles, which gives a more natural, speaker-like stage than a closed design, but also means people around you hear some of your music. Grado specifies a frequency response of 16 Hz to 34 kHz, a sensitivity of 104 dB at 1 mW and a nominal impedance of 38 ohms. The drivers are matched to within 0.05 dB.

Bluetooth 5.4, aptX Lossless and 60+ hours
For wireless listening, the Grado GW200 uses Bluetooth 5.4 and supports a long list of codecs: aptX Lossless, aptX Adaptive, aptX HD, aptX, AAC and SBC. With a compatible smartphone or source, aptX Lossless lets you stream CD-quality audio without the usual compression.
Battery life is given as more than 60 hours, so a week of commuting or several long listening sessions should not be a problem. Charging is done via USB-C, and a cable is included. A built-in microphone lets you take calls without taking the headphones off.
The Grado GW200 also keeps a single-sided 3.5 mm input. Connect a cable and it works as a passive wired headphone, without Bluetooth and without battery power. That makes it just as usable at home with a dedicated headphone amplifier as on the go.

Signature design, now in matte black
Visually, the Grado GW200 stays close to the brand’s classic look, now in matte black. It weighs 235 g. The headband combines a padded leather strap with an adjustable flexible steel band. Grado has also redesigned the gimbals in matte black and fitted stainless steel height rods and reinforced junction blocks.
The GW200 ships with Grado’s F cushions. Unlike the GW100, it is compatible with the brand’s full range of cushions, so owners can fine-tune comfort and sound to their own taste. Want to know more about the wired model whose driver technology inspired the GW200? Read our article on the Grado Signature HP100 SE.

Pricing and availability
The Grado GW200 costs $329 in the US and £329 in the UK. It will be available from December. Grado has not yet announced a euro price, so check with your local Grado dealer. More information is available in the Grado newsroom.
Key specifications
- Type: open-back wireless headphone, dynamic transducer, open-air operating principle
- Driver: 44 mm S driver, paper-composite diaphragm
- Frequency response: 16 Hz – 34 kHz
- THD: <0.3% at 100 dB
- Sensitivity: 104 dB at 1 mW
- Nominal impedance: 38 ohms
- Driver matching: 0.05 dB
- Bluetooth: 5.4; aptX Lossless, aptX Adaptive, aptX HD, aptX, AAC, SBC
- Battery life: 60+ hours, USB-C charging
- Wired: single-sided 3.5 mm input, works without battery power
- Microphone: built-in
- Weight: 235 g
- Price: $329 / £329, available from December

































