Japanese specialist WELLFLOAT has introduced the second generation of its standard vibration-control platform. The WELLFLOAT Board TYPE II series brings the two-stage suspension of the company’s top models to a more accessible board, and comes in three sizes for everything from a streamer to a heavy turntable.
Technology from gravitational-wave detection
WELLFLOAT has been developing its isolation technology in Japan since 2009. The principle is borrowed from the suspension systems used in gravitational-wave detectors, where the slightest vibration has to be kept away from extremely sensitive instruments. Instead of damping vibrations with soft materials, a WELLFLOAT mechanism suspends the load in a multi-pendulum structure that hardly transmits any movement.
For the WELLFLOAT Board TYPE II, the company uses a two-stage multi-pendulum system: four WELLFLOAT mechanisms per stage, in two stages. That design was inherited from the flagship Double4548 and Delta Extreme II. The resonance frequency is 3 Hz, and the theoretical transmissibility at 300 Hz is 10⁻⁸. In other words, vibrations from the floor or rack are reduced to a practically negligible level before they reach your equipment.

Design by Shiro Nakamura
The styling of the new boards was done by Shiro Nakamura, the automotive designer known for his work in the car industry. The WELLFLOAT Board TYPE II combines MDF with rigid stainless steel and comes in a black finish with a fine chrome accent along the sides. The board is 44 mm high and can carry a static load of 70 kg, enough for most amplifiers and turntables.

Three sizes
The series is available in three versions. The TYPE 2130 II has an A4 footprint of 297 × 210 mm and weighs 3 kg. The TYPE 3545 II measures 450 × 350 mm and weighs 8 kg, while the largest TYPE 4548 II measures 480 × 450 mm and weighs 11 kg. That makes the larger boards suitable for full-width components such as amplifiers, SACD players and turntables.
Isolation is not only about the boards under your equipment. Read how Dan D’Agostino approaches the same challenge in our news about the Momentum Z amplifier stands.

Pricing and availability
The WELLFLOAT Board TYPE II series was released in October 2026. WELLFLOAT has not yet published international prices; pricing and availability depend on the local distributor. More information can be found on the official WELLFLOAT website.
Key specifications
- Type: vibration-control board with two-stage multi-pendulum suspension
- Mechanisms: 4 WELLFLOAT mechanisms × 2 stages
- Resonance frequency: 3 Hz
- Theoretical transmissibility: 10⁻⁸ at 300 Hz
- Materials: MDF and rigid stainless steel, black finish
- Static load: 70 kg
- Height: 44 mm
- TYPE 2130 II: 297 × 210 mm, 3 kg
- TYPE 3545 II: 450 × 350 mm, 8 kg
- TYPE 4548 II: 480 × 450 mm, 11 kg
- Design: Shiro Nakamura



































